Veeco announced yesterday that it has entered into a strategic partnership with Daiyang Metal of Korea, a leader in the production of cold rolled stainless steel, to be its supplier of equipment to manufacture CIGS solar cells. As a first milestone in this relationship, Daiyang has placed an initial multi-million dollar purchase order with Veeco […]
Electron beam direct write (EBDW) lithography is well-developed and has better potential resolution than any other method, but writing speeds did not keep up with Moore’s law after about 1980, leading to abysmal throughput (measured in hours per wafer). Now, the e-Beam Initiative focusing on design for e-beam manufacturing (DFEB) and multibeam writing using MEMS […]
Partners SII NanoTechnology and Carl Zeiss NTS have joined with ASML R&D and Toshiba’s process and manufacturing engineering groups to show a new way to create accurate cross-sections of soft photoresist and low-k dielectric lines in dense circuit patterns. First shown in a poster paper at SPIE last week was the ability to generate accurate […]
One year after this editor covered an SPIE panel on reference metrology and summarized the situation as “there is no more noise; there is only signal,” another lively panel at SPIE this evening discussed the need for not just precise but accurate critical dimension (CD) measurements in advanced IC lines. With smaller structures and reduced […]
Applied Materials’ Technical Symposium at SPIE 2009 featured a panel discussion on next generation lithography (NGL) that was moderated by the company’s Ken MacWIlliams. The outstanding panelists were C. Grant Willson (UT-Austin), Burn Lin (TSMC), Jongwook Kye (AMD), Steve Radigan (Sandisk), and Milind Weling (Cadence). As would be expected from this panel, EUV steppers were […]
At the Nikon Lithovisions 2009 Symposium on February 22 this year in San Jose, California, Masato Hamatani described the features and beta test results for the NSR-S620 scanning immersion exposure tool, optimized for double patterning lithography. While the tool boasts only one wafer stage, its “Streamlign Platform” concept shoots 200 wafers per hour with 2nm […]
JEOL will install the first e-beam direct-write-on-wafer (EBDW) lithography tool to support nanotechnology development in the Pacific Northwest when the University of Washington takes delivery of a JBX-6300FS tool. The system will be installed in the state-funded Washington Technology Center Microfabrication Lab. Funding for the tool acquisition was provided through a state-supported STAR researchers’ grant […]
Metrosol has joined SEMATECH’s Front End Process Technologies Program at the College of Nanoscale Science and Engineering (CNSE) of the University at Albany to address metrology and data-analysis solutions for 45nm node and beyond IC fabs. The joint partnership will expand on current work to develop inline metrology techniques to monitor the thickness and composition […]
At Levitronix’s Ultrapure Fluid Handling and Wafer Cleaning Conference on February 11th, Particle Measuring Systems reviewed the limits of being able to detect things we do not want to find in flowing fluids, as enabled by a new digital detector array they call NanoVision Technology. Steven Verhaverbeke, tool design expert for Applied Materials who presented […]
CMP applications experts gathered in Santa Clara, California on February 10th to share their experience and expertise at the fifth annual seminar sponsored by Levitronix. Leading developers, manufacturers, and end-users of CMP discussed all aspects of the technology, and since Levitronix makes magnetic levitation (MagLev) pumps there were many thorough presentations on slurry distribution issues. […]